Cellular Concrete Foaming Agent For Cement Board Partition Concrete Foaming Agent

Description of  foaming agent

  TR-A Concrete Foaming agent produced by Plant mixture can reduce the density of concrete, resulting in lightweight concrete or low strength (mobile filler) concrete, which can be achieved: To increase production; Best machinability and pumpability; Little or no bleeding; Controlled isolation; Reduces shrinkage and settlement; Control force development.Suitable for basic applications such as foam cement roof insulation, toilet bridge backfill.

 Synthetic foaming agent for concrete advantages

1. Low cost / high concentration

Synthetic foaming agent for concrete has a low usage rate and it is this which must be considered when choosing a foaming agent, not just its basic price per litre.

2. Fine foam and good stability

It can be used in a wide range of temperature and water quality. This stability means that the foam bubbles sustain themselves and support the mortar around them. The bubbles do not burst easily and hence the foamed concrete does not collapse when it is made or after it has been placed.

3.The amount of bleeding is low.

4.Excellent strength and thermal insulation properties.

It means that the foamed concrete produced from Tongrun Foaming Agent is ideal for a wide range of applications.

5.Foaming Agent is essentially harmless and easily washes off.

TR-B Protein foaming agent is a dark brown viscous liquid with low impurity content, less pungent odor, uniform quality, good quality consistency, good foaming performance and excellent performance. It belongs to a new generation of animal-based cement foaming agent.

The bubble liquid film formed by keratin is tough and elastic, and the foam is stable. After being pressed by external force, it can immediately return to its original shape and is not easy to break. Therefore, the pores of the foamed concrete produced by it are mostly closed spherical, and the foam diameter is small, which is suitable for the production of ultra-low density foamed concrete. It has good pouring stability and high strength of foam concrete. It is suitable for the production of standardized components such as foamed cement partition boards and homogeneous self-insulating blocks.

TR-C foaming agent is a polymer composite foaming agent, which is suitable for the production of standardized components such as foamed cement partition boards and homogeneous self-insulating blocks.

 Features of TR-C polymer foaming agent

1 Increase the strength of wall panels by 20%. the

The foam wallboard made of TR-C polymer foaming agent has high foaming toughness, high cell integrity, closed cell rate of more than 90%, and a spherical thin shell structure, which makes the strength of foam concrete higher than that of foam concrete. 20% more with connected foam cells. the

2. Improve the thermal insulation performance of wall panels and other products. the

The foam wallboard made of the foaming agent has extremely high cell integrity, and the cell closure rate reaches over 90%. Hundreds of millions of closed cells are formed inside the wallboard, which can seal a large amount of air, form an inert heat conduction layer, and improve the thermal insulation performance of the wallboard. the

3. High stability. the

TR-C polymer foaming agent is composed of high-performance foam stabilizer and surfactant. Foam stability is remarkable. In the process of wallboard production, the foam paste has high stability, no mold collapse phenomenon, good foamability and constructability, and can fill the mold without leaving dead ends.

 TR-D has good waterproof performance, and the foam is small in cement. Applied to self-insulating blocks, partition boards, and various lightweight concrete products.

 Luoyang Tongrun Information Technology Co., Ltd. has 4 kinds of cement foaming agents, which can meet various application scenarios, and a professional technical service team can solve construction problems for you.

Package of foaming agent

25kg/barrel, 200kg/barrel, IBC tank

Storage method of TR-C polymer foaming agent

The polymer foaming agent should be sealed and stored in a cool, ventilated warehouse.

If it is exposed to direct sunlight or high temperature for a long time, it will easily cause deterioration. 

TRUNNANO is the world's leading nanomaterial technology developer and application manufacturer. The company has more than 20 years of industry experience, after years of scientific research and production, has been professionals in lightweight concrete and concrete solutions.

We can supply concrete foaming agents, superplasticizers, foam concrete strength enhancers for lightweight concrete mix, CLC blocks all over the world, suitable for ordinary cement foamed concrete cast-in-place, block, plate, insulation wall, etc. and also dispersible adhesive powder, HPMC, release agent, AOS, AES and other concrete and lightweight concrete additives

We also produced a serious of professional equipment for your need, such as foam generator, concrete mixer, concrete pumping machine,foam concrete production line, etc.