TR-C polymer concrete foaming agent was developed by Luoyang Tongrun to meet the performance requirements of foamed wallboards and CLC blocks.
TR-C polymer foaming agent can satisfy the compressive strength, thermal conductivity, and stability of foamed wallboard.
TR-C polymer foaming agent is especially suitable for foamed wallboard, polystyrene particle-foamed cement wallboard, and other foamed wallboard products, CLC blocks.
Compared with the industry standard, the stability and foaming ratio of the TR-C foaming agent are greatly improved.
Parameters of TR-Cpolymerfoaming agent
Operating temperature (℃)
Performance characteristics of TR-C polymer foaming agent
1 Increase the strength of the wallboard by 20%.
Part of the raw materials of TR-C polymer foaming agent is made of German raw materials and surfactant Ao. because of its high foam toughness, the foam wallboard made of foamed wallboard has high cell integrity, closed cell ratio of more than 90%, and spherical thin shell structure, which increases the strength of foamed concrete by more than 20% compared with foam concrete with connected foam cells.
To achieve the same design strength, foam concrete with a high closed-cell ratio can reduce density and save 10% of raw material cost.
(2) To improve the thermal insulation performance of wallboards and other products.
The foam wallboard made of the foaming agent has extremely high cell integrity, and the cell closure rate is more than 90%. Hundreds of millions of closed pores are formed inside the wallboard, which can seal a large amount of air, form an inert heat conduction layer, and improve the thermal insulation performance of the wallboard.
At the same time, because it has higher strength than other foamed cement with the same density when it reaches the same strength, it can reduce the density of foam concrete, thus reducing the cost and improving the performance of thermal insulation.
3 High stability.
TR-C polymer foaming agent is composed of a high-performance foam stabilizer and surfactant. The foam stability is remarkable. In the wallboard production process, the foam paste stability is high, there is no mold collapse phenomenon, the foaming and workability are good, and it can fill the mold without leaving a dead corner.
Instructions for TR-C polymer foaming agent
(1)Dilute in advance in the proportion of 1 part of the foaming agent: 30-40 parts of water.
(2)When the appropriate amount of foam is injected according to the bulk density requirement, and the mixture is evenly mixed, the production of foam concrete is completed.
(3)The foaming agent should add 0.8-1kg foaming agent stock solution per cubic foam concrete product.
Package of TR-C polymer foaming agent
25kg/barrel, 200kg/barrel, IBC tank
Storage method of TR-C polymer foaming agent
The polymer foaming agent should be sealed and stored in a cool, ventilated warehouse.
If it is exposed to direct sunlight or high temperature for a long time, it will easily cause deterioration.
TRUNNANO is the world's leading nanomaterial technology developer and application manufacturer. The company has more than 20 years of industry experience, after years of scientific research and production, has been professionals in lightweight concrete and concrete solutions.
We can supply concrete foaming agents, superplasticizers, foam concrete strength enhancers for lightweight concrete mix, CLC blocks all over the world, suitable for ordinary cement foamed concrete cast-in-place, block, plate, insulation wall, etc. and also dispersible adhesive powder, HPMC, release agent, AOS, AES and other concrete and lightweight concrete additives
We also produced a serious of professional equipment for your need, such as foam generator, concrete mixer, concrete pumping machine,foam concrete production line, etc.