Answers

  • 0
  • 0

What can Silicon Carbide Devices Bring to New Energy Vehicles?

How serious are fertility problems today? People don't want to give birth,can't afford it, and can't give birth that has become the "three mountains".
The problem of childbirth is related to the people's livelihood. Whether a country can prosper or not depends on the population. I saw a set of data a few days ago. The data shows that on January 1, 1990, 2,784 babies were born in Shanghai. Ten years later, on January 1, 2000, 1,148 babies were born in Shanghai. In 2010, the number became 380. , 2020 only 156 people, the decline in the birth rate is shocking. The three most critical reasons are: I don't want to give birth, I can't afford it, I can't give birth! The decline of the global population will bring a series of economic and social problems, among which the demand for silicon carbide powder will also be affected.

What is Silicon Carbide SiC?
Silicon carbide (SiC) is a hard compound containing silicon and carbon. A semiconductor, it is found in nature in the form of the extremely rare mineral moxanite. 
It has been mass-produced in powder and crystal form since 1893 for use as an abrasive.  Silicon carbide particles can be sintered together to form very hard ceramics that are widely used in applications requiring high durability, such as ceramic plates in car brakes, car clutches, and bulletproof vests. Large silicon carbide single crystals can be grown by the Lely method, and they can be cut into gemstones called synthetic mossanes. 
 
What can Silicon Carbide Devices Bring to New Energy Vehicles?
Silicon carbide power devices have been used in critical power systems inside electric vehicles, including traction inverters, on-board chargers (OBC), and DC-DC converters.  Key advantages over traditional silicon devices include higher voltage and higher frequency features, resulting in higher system efficiency, faster switching, lower losses, and better thermal management. Compared with silicon-based devices, silicon carbide devices have the following advantages:
 
Lift acceleration 
The use of silicon carbide devices can make the driving motor bear more input power at low speed, and because of its high thermal performance, not afraid of the thermal effect and power loss caused by excessive current. When the vehicle starts, the driving motor can output more torque and obtain stronger acceleration ability. 
 
Increase mileage 
SiC devices can reduce the loss through two dimensions of conduction/switching, so as to achieve the purpose of increasing the range of electric vehicles. The results show that the turn-off loss of sic-MOS is about 20% of that of Si-IGBT at 25°C junction temperature. At 175°C junction temperature, the turn-off loss of sic-MOS is only 10% of that of SI-IGBT.  In general, the use of SiC devices in new energy vehicles can increase the driving range by 5-10%, and the average driving range is more than 600 kilometers. 
 
High rated voltage 
Silicon carbide MOSFET has a higher voltage rating, making the technology suitable for EV applications and EV quick charging infrastructure. More importantly, the SiC can be replaced directly without major changes, enabling rapid development while keeping the BOM low. 
 
Lightweight 
To achieve lightweight thanks to the superior performance of SiC, SiC devices can achieve the effect of reducing the volume in the following aspects: 
1, the package size is smaller, and the average weight is reduced by 150 to 200 kg; 
2, reduce the use of filters and passive devices such as transformers, capacitors, inductors, etc.; 
3, reduce the radiator volume. 
 
Economical
At present, the price of SiC devices is 4-6 times that of silicon based devices, but the use of SiC devices to achieve a substantial reduction in battery cost and the improvement of the range, reducing the overall cost of the vehicle.
 
Silicon Carbide Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest SiC price, you can send us your inquiry for a quote. ([email protected])
 
Silicon Carbide Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality SiC, please feel free to contact us and send an inquiry. ([email protected])

 

3D printing technology emerged in the mid-1990s and is actually the latest rapid prototyping device utilizing technologies such as light curing and paper lamination. It is basically the same as ordinary printing. The printer is equipped with "printing materials" such as liquid or powder. After connecting to the computer, the "printing materials" are superimposed layer by layer through computer control, and finally the blueprint on the computer is turned into a real thing. This printing technology is called 3D stereo printing technology.
Our company is a strong company that provides excellent 3D printing silicon carbide powder. If you need 3D printing and silicon carbide powder, please feel free to contact us.

Inquiry us

Our Latest Answers

Is boron amorphous or crystalline?

Is boron amorphous or crystalline?Boron can be prepared in several crystalline and amorphous forms. The well-known forms of crystallization are α-rhombohedral (α-R), β-rhombohedral (β-R) and β-tetragonal (β-T). In spec…

What does copper oxide do?

What is copper oxide?Copper oxide is an inorganic substance. Copper oxide chemical formula is CuO. It is a black oxide of copper. Slightly bisexual and slightly hygroscopic. Insoluble in water and ethanol, easily soluble in acid, thermally stable, de…

How do you make graphite expandable?

Expandable graphite or exfoliated graphite is made from the naturally occurring mineral graphite. The layered structure of graphite allows molecules to be inserted between the graphite layers. By adding acid, graphite sulfate can usually be converted…